ISO/IEC DIS 9596-2 - 35 - COM VII-177-E CCITT\COMVII\CONTR\178E1.DOC Draft CCITT Rec. X.712 1 International Telegraph and Telephone COM VII-178-E Consultative Committee October 1991 (CCITT) Original: English Period 1989-1992 Question: 24/VII STUDY GROUP VII - CONTRIBUTION 178 SOURCE:EDITOR (MR. N. TRICKEY) TITLE : DRAFT RECOMMENDATION X.172: "INFORMATION TECHNOLOGY - OPEN SYSTEM INTERCONNECTION - COMMON MANAGEMENT INFORMATION PROTOCOL: PROTOCOL IMPLEMENTATION CONFORMANCE STATMENT (PICS) PRO FORMA" ________ CONTENTS Page 1 Scope 2 2 Normative references 2 2.1Identical CCITT Recommendations | International Standards 2 2.2Paired CCITT Recommendations | International Standards equivalent in technical content 2 2.3Additional references 4 3 Definitions 4 3.1Conformance testing methodology definitions 4 3.2Systems management overview definitions 4 4 Abbreviations 4 5 Conformance 4 Annexes A (normative) PICS proforma 6 B (normative) PICS proforma for protocol version 1 67 Information technology — Open Systems Interconnection — Common management information protocol: Protocol implementation conformance statement (PICS) proforma 1 Scope This Recommendation | International Standard provides the Protocol Implementation Conformance Statement (PICS) proforma for the detailed expression of the conformance requirements of CCITT Rec. X.711 | ISO/IEC 9596-1. This PICS proforma is in compliance with the relevant requirements and in accordance with the relevant guidance, given in CCITT Rec. X.291 | ISO/IEC 9646-2. Annex A of this Recommendation | International Standard contains the PICS proforma for version 2 of CMIP. Annex B of this Recommendation | International Standard contains version 1 of the tables of the kernel functional unit that were amended by version 2. All other tables of the kernel functional unit are the same for both versions 1 and 2 of CMIP. 2 Normative references The following CCITT Recommendations and International Standards contain provisions which, through reference in this text, constitute provisions of this Recommendation | International Standard. At the time of publication, the editions indicated were valid. All Recommendations and Standards are subject to revision, and parties to agreements based on this Recommendation | International Standard are encouraged to investigate the possibility of applying the most recent editions of the Recommendations and Standards listed below. Members of IEC and ISO maintain registers of currently valid International Standards. The CCITT Secretariat maintains a list of currently valid CCITT Recommendations. 2.1 Identical CCITT Recommendations | International Standards — CCITT Recommendation X.701 (1992) | ISO/IEC 10040 : 1992, Information technology - Open Systems Interconnection - Systems Management Overview. 2.2 Paired CCITT Recommendations | International Standards equivalent in technical content — CCITT Recommendation X.219 (1988), Remote operations: Model, notation and service definition. ISO/IEC 9072-1 : 1989, Information processing systems - Text Communication - Remote Operations - Part 1: Model, notation and service definition. — CCITT Recommendation X.225 (1988), Session protocol specification for Open Systems Interconnection for CCITT applications. ISO 8327 : 1987, Information processing systems - Open Systems Interconnection - Basic connection oriented session protocol specification. — CCITT Recommendation X.226 (1988), Presentation protocol specification for Open Systems Interconnection for CCITT applications. ISO 8823 : 1987, Information processing systems - Open Systems Interconnection - Connection oriented presentation protocol specification. — CCITT Recommendation X.227 (1988), Association control protocol specification for Open Systems Interconnection for CCITT applications. ISO 8650 : 1987, Information processing systems - Open Systems Interconnection - Protocol specification for the Association Control Service Element. — CCITT RecommendationX.229 (1988), Remote operations: Protocol specification. ISO/IEC 9072-2 : 1989, Information processing systems - Text Communication - Remote Operations - Part 2: Protocol Specification. — CCITT Recommendation X.711 (1991), Common management information protocol specification for CCITT applications. ISO/IEC 9596-1 : 1991, Information technology - Open Systems Interconnection - Common management information protocol - Part 1: Specification. — CCITT Recommendation X.290 (1991), OSI conformance testing methodology and framework for protocol Recommendations for CCITT applications - General concepts. ISO/IEC 9646-1 : 1991, Information technology - OSI conformance testing methodology and framework - Part 1: General concepts. — CCITT Recommendation X.291 (1991), OSI conformance testing methodology and framework for protocol Recommendations for CCITT applications - Abstract test suite specification, Rec. X.291. ISO/IEC 9646-2 : 1991, Information technology - OSI conformance testing methodology and framework - Part 2: Abstract test suite specification. 2.3 Additional references — ISO/IEC 9596 : 1990, Information technology - Open Systems Interconnection - Common management information protocol specification. 3 Definitions For the purposes of this Recommendation | International Standard, the following definitions apply. 3.1 Conformance testing methodology definitions This Recommendation | International Standard makes use of the following terms defined in CCITT Rec. X.290 | ISO/IEC 9646-1. a) PICS proforma; b) protocol implementation conformance statement (PICS); c) system conformance statement. 3.2 Systems management overview definitions This Recommendation | International Standard makes use of the following terms defined in CCITT Rec. X.701 | ISO/IEC 10040. a) dependent conformance; b) general conformance. 4 Abbreviations ACSE Association Control Service Element APDU application protocol data unit CMIP Common Management Information Protocol CMIS Common Management Information Services CMISE Common Management Information Service Element PDU protocol data unit PICS protocol implementation conformance statement ROSE Remote Operations Service Element 5 Conformance A PICS proforma which conforms to this Recommendation | International Standard shall be textually identical to Annex A, differing only in pagination and page headers. A PICS which conforms to this Recommendation | International Standard shall — describe an implementation which conforms to either the dependent conformance class or the general conformance class of CCITT Rec. X.711 | ISO/IEC 9596-1; — be a conforming PICS proforma which has been completed in accordance with the instructions for completion given in clause 1 of Annex A; — state the class to which conformance is claimed; — include the information necessary to uniquely identify both the supplier and the implementation. The supplier of a protocol implementation which is claimed to conform to CCITT Rec. X.711 | ISO/IEC 9596-1 shall complete a copy of the PICS proforma provided in Annex A as part of the conformance requirements, shall complete a copy of the PICS proforma provided in Annex B if the implementation claims support for version 1 of CMIP, and shall provide the information necessary to identify both the supplier and the implementation. NOTE — Version 1 of CMIP is specified in ISO/IEC 9596, now superceded by ISO/IEC 9596-1. There is no CCITT equivalent of ISO/IEC 9596. Annex A (This annex does form an integral part of this Recommendation | International Standard) PICS proforma1) A.1 Instructions for completing the PICS proforma A.1.1 Purpose and structure The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of CCITT Rec. X.711 | ISO/IEC 9596- 1 may provide information in a standard form. The PICS proforma is subdivided into clauses for the following categories of information — implementation details; — protocol details; — overall conformance claim; — implementation capabilities. A.1.2 Symbols, abbreviations and terms The PICS proforma contained in this Annex is comprised of information in a tabular form in accordance with the guidelines presented in CCITT Rec. X.291 | ISO/IEC 9646-2. The following abbreviations are used ADB ANY DEFINED BY DepSts Dependent status GenSts General status Spt Support Sts Status TVR Type(s), value(s) and range(s) The following common notations, defined in CCITT Rec. X.291 | ISO/IEC 9646-2 are used for the status (Sts) column c conditional cN (N is an integer) for mutually exclusive or selectable conditions from a set m mandatory o optional x prohibited — not applicable The following requirements are commonly used throughout the PICS proforma — c1 support of at least one is required; — c2 support is required if the multiple selection functional unit is supported; — c3 support is required if the filter functional unit is supported; — c4 support is required if the multiple object selection or multiple reply functional units are supported; — c5 support is required if the cancel get functional unit is supported; — c6 parameter is present only if a result is generated; — c7 support of at least 1 of the elements of the CHOICE is required. The following common notations, defined in CCITT Rec. X.291 | ISO/IEC 9646-2 are used for the support (Spt) column Err the item is treated as a protocol error Ig the item is ignored (i.e processed syntactically but not semantically) N not implemented Y implemented — not applicable The parameter names in the tables within this Recommendation | International Standard correspond with those specified in the abstract syntax of CCITT Rec. X.711 | ISO/IEC 9596-1. A.1.3 Scoping rules In the Status column of the tables in this Recommendation | International Standard, a mandatory element contained within an optional constructor parameter is mandatory only if the option is taken. A.1.4 Instructions for completing the PICS The supplier of the implementation shall enter an explicit statement in each of the boxes provided using the notation described in clause A.1.2. Specific instruction is provided in the text which preceeds each table. A.2 Identification of the implementation A.2.1 Date of statement The supplier of the implementation shall enter the date of this statement in the box below. Use the format DD-MM-YYYY. Date of statement A.2.2 Identification of the implementation The supplier of the implementation shall enter information necessary to uniquely identify the implementation and the system(s) in which it may reside, in the box below. A.2.3 Contact The supplier of the implementation shall provide information on whom to contact if there are any queries concerning the content of the PICS, in the box below. A.2.4 Conformance class The supplier of the implementation shall state the class to which conformance is claimed , in the box below. Which class of conformance is claimed? A.2.5 Relationship with the system conformance statement The supplier of the implementation shall provide information which describes the relationship between the PICS and the system conformance statement for the system, in the box below. If a claim to the dependent conformance class is made, the system conformance statement shall identify the PICS for each of the standardised uses of CMIS to which conformance is claimed. A.3 Identification of the protocol The supplier of the implementation shall enter the title, reference number and date of the publication of the Recommendation | International Standard to which conformance is claimed, in the box below. Recommendation | International Standard to which conformance is claimed The supplier of the implementation shall specify support of versions of CMIP, in the box below. Which version(s) of the CMIP protocol are supported? The supplier of the implementation shall enter the name of each abstract syntax for CCITT Rec. X.711 | ISO/IEC 9596-1 to which conformance is claimed, and the corresponding transfer syntax name(s) in the box below. Abstract syntax name Transfer syntax name(s) A.3.1 Defect report numbers and amendments implemented The supplier of the implementation shall enter the reference numbers of implemented defect reports or corresponding amendment documents which modify the specification to CCITT Rec. X.711 | ISO/IEC 9596-1, in the box below. A.3.2 Addenda implemented The supplier of the implementation shall state the titles and reference numbers of implemented addenda to CCITT Rec. X.711 | ISO/IEC 9596-1, in the box below. A.4 Global statement of conformance The supplier of the implementation shall state whether or not all mandatory capabilities are implemented for CCITT Rec. X.711 | ISO/IEC 9596-1. Are all mandatory capabilities implemented? NOTE — Answering NO to this question indicates non-conformance to the protocol standard. Non-supported mandatory capabilities are listed in the PICS below, explaining why the status of the implementation is abnormal. Capability not implemented Reason A.5 Capabilities A.5.1 Initiator/Responder capability The supplier of the implementation shall state the capability for initiating and responding to an association request which specifies the use of CMISE, in the box below. Association Association initiator responder Sts Spt Sts Spt Does the implementation c1 c1 support association initialisation? The supplier of the implementation shall state the capability for releasing an association, in the box below. Release Release initiator responder Sts Spt Sts Spt Does the implementation support association release c1 c1 for an association initiated by the c1 c1 imementation? for an association not initiated by the implementation? The supplier of the implementation shall state whether or not the CMIPUserInfo and CMIPAbortInfo parameters specified by CCITT Rec. X.711 | ISO/IEC 9596-1 are supported. The supplier shall state the capability for sending and receiving each parameter and the type, value(s) and range(s), in the boxes below. Table A.1 — CMIPUserInfo parameter support (in AARQapdu) Sender Receiver Index Parameter Sts Spt TVR Sts Spt TVR name A.1.1 CMIPUserInfo m — m — A.1.1 m m .1 protocolVers ion A.1.1 c8 m .2 functionalUn its A.1.1 o m .3 accessContro l A.1.1 userInfo o m .4 c8: if A.4.2 or A.4.3 or A.4.4 or A.4.5 or A.4.6 then m else o. Table A.2 — CMIPUserInfo parameter support (in AAREapdu) Sender Receiver Inde Parameter Sts Spt TVR Sts Spt TVR x name A.2. CMIPUserInfo m — m — 1 A.2. m m 1.1 protocolVers ion A.2. c8 m 1.2 functionalUn its A.2. o m 1.3 accessContro l A.2. userInfo o m 1.4 c8: if A.4.2 or A.4.3 or A.4.4 or A.4.5 or A.4.6 then m else o. Table A.3 — CMIPAbortInfo parameter support Sender Receiver Inde Parameter Sts Spt TVR Sts Spt TVR x name A.3. CMIPAbortInf m — m — 1 o A.3. m m 1.1 abortSource A.3. userInfo o m 1.2 A.5.2 Major capabilities The supplier of the implementation shall state whether or not the functional units specified by CCITT Rec. X.711 | ISO/IEC 9596-1 are supported, in the box below. Table A.4 — Functional unit support Index Functional unit Sts Spt A.4.1 Kernel m A.4.2 Multiple object o selection A.4.3 Filter o A.4.4 Multiple reply c9 A.4.5 Extended o service A.4.6 Cancel get o c9: if A.4.2 then m else o. A.5.3 Protocol parameters A.5.3.1 System wide parameters System wide parameters have a single specification applicable for all APDUs in which they occur and the corresponding tables in which they occur contain references to the following declarations. The supplier of the implementation shall state whether or not the following parameters specified by CCITT Rec. X.711 | ISO/IEC 9596-1 are supported and their type, value(s) and range(s), in the boxes below. The supplier shall indicate the status of support for sending and receiving each parameter. Table A.5 — Scope parameter support Sender Receiver Index Parameter Syntax Val Sts Spt TVR Sts Spt TVR name ue A.5 Scope CHOICE — c2 c2 A.5.1 INTEGE 0 c1 m R to 2 A.5.2 INTEGE — c1 m individual R Levels A.5.3 INTEGE — c1 m baseToNthL R evel Table A.6 — FilterItem parameter support (sending) Index Parameter Syntax Sts Spt TVR name A.6 FilterItem CHOICE c3 — A.6.1 equality SEQUENCE c1 A.6.1.1 CHOICE m — attributeId A.6.1.1 OBJECT c7 .1 IDENTIFIER A.6.1.1 INTEGER c7 .2 A.6.1.2 ADB attributeId m attributeValu e A.6.2 substrings SEQUENCE OF c1 CHOICE A.6.2.1 SEQUENCE m initialString A.6.2.1 CHOICE m — .1 attributeId A.6.2.1 OBJECT c7 .1.1 IDENTIFIER A.6.2.1 INTEGER c7 .1.2 A.6.2.1 string ADB attributeId m .2 A.6.2.2 anyString SEQUENCE m A.6.2.2 CHOICE m — .1 attributeId A.6.2.2 OBJECT c7 .1.1 IDENTIFIER A.6.2.2 INTEGER c7 .1.2 A.6.2.2 string ADB attributeId m .2 A.6.2.3 SEQUENCE m finalString A.6.2.3 CHOICE m — .1 attributeId A.6.2.3 OBJECT c7 .1.1 IDENTIFIER A.6.2.3 INTEGER c7 .1.2 A.6.2.3 string ADB attributeId m .2 A.6.3 SEQUENCE c1 greaterOrEqua l A.6.3.1 CHOICE m — attributeId A.6.3.1 OBJECT c7 .1 IDENTIFIER A.6.3.1 INTEGER c7 .2 A.6.3.2 ADB attributeId m attributeValu e Table A.6 — FilterItem parameter support (sending) (continued) Index Parameter Syntax Sts Spt TVR name A.6.4 lessOrEqual SEQUENCE c1 A.6.4.1 CHOICE m — attributeId A.6.4.1 OBJECT c7 .1 IDENTIFIER A.6.4.1 INTEGER c7 .2 A.6.4.2 ADB attributeId m attributeValu e A.6.5 present CHOICE m — A.6.5.1 OBJECT c7 IDENTIFIER A.6.5.2 INTEGER c7 A.6.6 subsetOf SEQUENCE m A.6.6.1 CHOICE m — attributeId A.6.6.1 OBJECT c7 .1 IDENTIFIER A.6.6.1 INTEGER c7 .2 A.6.6.2 ADB attributeId m attributeValu e A.6.7 supersetOf SEQUENCE c1 A.6.7.1 CHOICE m — attributeId A.6.7.1 OBJECT c7 .1 IDENTIFIER A.6.7.1 INTEGER c7 .2 A.6.7.2 ADB attributeId m attributeValu e A.6.8 SEQUENCE c1 nonNullSetInt ersection A.6.8.1 CHOICE m — attributeId A.6.8.1 OBJECT c7 .1 IDENTIFIER A.6.8.1 INTEGER c7 .2 A.6.8.2 ADB attributeId m attributeValu e Table A.7 — FilterItem parameter support (receiving) Index Parameter Syntax Sts Spt TVR name A.6 FilterItem CHOICE c3 — A.7.1 equality SEQUENCE m A.7.1.1 CHOICE m — attributeId A.7.1.1 OBJECT m .1 IDENTIFIER A.7.1.1 INTEGER m .2 A.7.1.2 ADB attributeId m attributeValu e A.7.2 substrings SEQUENCE OF m CHOICE A.7.2.1 SEQUENCE m initialString A.7.2.1 CHOICE m — .1 attributeId A.7.2.1 OBJECT m .1.1 IDENTIFIER A.7.2.1 INTEGER m .1.2 Table A.7 — FilterItem parameter support (receiving) (continued) Index Parameter Syntax Sts Spt TVR name A.7.2.1 string ADB attributeId m .2 A.7.2.2 anyString SEQUENCE m A.7.2.2 CHOICE m — .1 attributeId A.7.2.2 OBJECT m .1.1 IDENTIFIER A.7.2.2 INTEGER m .1.2 A.7.2.2 string ADB attributeId m .2 A.7.2.3 SEQUENCE m finalString A.7.2.3 CHOICE m — .1 attributeId A.7.2.3 OBJECT m .1.1 IDENTIFIER A.7.2.3 INTEGER m .1.2 A.7.2.3 string ADB attributeId m .2 A.7.3 SEQUENCE m greaterOrEqua l A.7.3.1 CHOICE m — attributeId A.7.3.1 OBJECT m .1 IDENTIFIER A.7.3.1 INTEGER m .2 A.7.3.2 ADB attributeId m attributeValu e A.7.4 lessOrEqual SEQUENCE m A.7.4.1 CHOICE m — attributeId A.7.4.1 OBJECT m .1 IDENTIFIER A.7.4.1 INTEGER m .2 A.7.4.2 ADB attributeId m attributeValu e A.7.5 present CHOICE m — A.7.5.1 OBJECT m IDENTIFIER A.7.5.2 INTEGER m A.7.6 subsetOf SEQUENCE m A.7.6.1 CHOICE m — attributeId A.7.6.1 OBJECT m .1 IDENTIFIER A.7.6.1 INTEGER m .2 A.7.6.2 ADB attributeId m attributeValu e A.7.7 supersetOf SEQUENCE m A.7.7.1 CHOICE m — attributeId A.7.7.1 OBJECT m .1 IDENTIFIER A.7.7.1 INTEGER m .2 A.7.7.2 ADB attributeId m attributeValu e A.7.8 SEQUENCE m nonNullSetInt ersection A.7.8.1 CHOICE m — attributeId A.7.8.1 OBJECT m .1 IDENTIFIER A.7.8.1 INTEGER m .2 A.7.8.2 ADB attributeId m attributeValu e Table A.8 — CMISFilter parameter support Sender Receiver Ind Paramete Syntax Sts Spt Max no of Sts Spt Max no of ex r name FilterItems FilterItems A.8 CMISFilt CHOICE c3 — c3 — er A.8 item FilterItem m — m — .1 A.8 and SET OF m m .2 CMISFilter A.8 or SET OF m m .3 CMISFilter A.8 not CMISFilter m m .4 Table A.9 — CMISFilter complexity limitations Ind Complexity limitation Sender Receive ex r A.9 Maximum nesting depth of CMISFilter expressions .1 that may occur in an 'AND' (ref A.8.2) A.9 Maximum nesting depth of CMISFilter expressions .2 that may occur in an 'OR' (ref A.8.3) A.9 Maximum number of FilterItem parameters in a .3 CMISFilter parameter A.5.3.2 Common parameters Common parameters may have a specification applicable for many APDUs in which they occur. If the supplier of the implementation provides details of the support of any parameter in the tables below, then an index reference to these details may be supplied in the TVR column of any table in clause A.5.5 instead of repeating the information. The reference should be specified in the form "[see Table A.10.x]". If the implementation supports a common specification for both the sending and receiving of any parameter, then it is recommended that Table A.10 be used for this purpose; otherwise the specification shall be inserted in the appropriate table(s) in A.5.5. For example, if an implementation supports a single specification for the invokeID parameter, then the supplier may provide the details in Table A.10 and for each subsequent instance of the requirement to specify support for the parameter, insert a reference to the common specification as "[see Table A.10.1]". The supplier of the implementation may state the type(s), value(s) and range(s) whether of any of the following parameters specified by CCITT Rec. X.711 | ISO/IEC 9596-1, in the boxes below. Table A.10 — Common parameter support Index Parameter name Syntax Spt TVR A.10.1 invokeID INTEGER A.10.2 linked-ID INTEGER A.10.3 baseManagedObjectC CHOICE — — lass A.10.3. OBJECT 1 IDENTIFIER A.10.3. INTEGER 2 A.10.4 baseManagedObjectI CHOICE — — nstance A.10.4. DistinguishedN 1 ame Table A.10 — Common parameter support (continued) Index Parameter name Syntax Spt TVR A.10.4. OCTET STRING 2 A.10.4. RDNSequence 3 A.10.5 accessControl EXTERNAL A.10.6 synchronization ENUMERATED A.10.7 managedObjectClass CHOICE — — A.10.7. OBJECT 1 IDENTIFIER A.10.7. INTEGER 2 A.10.8 managedObjectInsta CHOICE — — nce A.10.8. DistinguishedN 1 ame A.10.8. OCTET STRING 2 A.10.8. RDNSequence 3 A.10.9 currentTime GeneralizedTim e A.10.10 actionType CHOICE — — A.10.10 OBJECT .1 IDENTIFIER A.10.10 INTEGER .2 A.10.11 attributeId CHOICE — — A.10.11 INTEGER .2 A.10.12 eventType CHOICE — — A.10.12 OBJECT .1 IDENTIFIER A.10.12 INTEGER .2 A.5.3.3 Other parameters Some parameters only occur in a limited number of APDUs. Declaration of the support for these parameters shall be specified in the tables in which they occur. A.5.4 Protocol data units The supplier of the implementation shall state whether or not the protocol data units specified by CCITT Rec. X.711 | ISO/IEC 9596-1 are supported, in the boxes below. If the implementation claims support for the dependent conformance class, the supplier shall indicate the the protocol data units in the DepSts column that are required by the standardised use of CMIS. The supplier shall indicate the status of support for sending and receiving each PDU. Table A.11 — Protocol data unit support for kernel functional unit Sender Receiver Index Protocol data unit GenSt DepSt Spt GenSt DepSt Spt s s s s A.11. ROIV-m-Action m m 1 A.11. ROIV-m-Action-Confirmed m m 2 A.11. ROIV-m-Create m m 3 A.11. ROIV-m-Delete m m 4 A.11. ROIV-m-EventReport m m 5 A.11. ROIV-m-EventReport- m m 6 Confirmed A.11. ROIV-m-Get m m 7 A.11. ROIV-m-Set m m 8 A.11. ROIV-m-Set-Confirmed m m 9 A.11. RORS-m-Action-Confirmed m m 10 A.11. RORS-m-Create m m 11 A.11. RORS-m-Delete m m 12 A.11. RORS-m-EventReport- m m 13 Confirmed A.11. RORS-m-Get m m 14 A.11. RORS-m-Set-Confirmed m m 15 A.11. ROER-accessDenied m m 16 A.11. ROER- m m 17 classInstanceConflict A.11. ROER- m m 18 complexityLimitation A.11. ROER- m m 19 duplicateManagedObjectI nstance A.11. ROER-getListError m m 20 A.11. ROER- m m 21 invalidArgumentValue A.11. ROER- m m 22 invalidAttributeValue A.11. ROER- m m 23 invalidObjectInstance A.11. ROER- m m 24 missingAttributeValue A.11. ROER-noSuchAction m m 25 A.11. ROER-noSuchArgument m m 26 A.11. ROER-noSuchAttribute m m 27 A.11. ROER-noSuchEventType m m 28 A.11. ROER-noSuchObjectClass m m 29 A.11. ROER- m m 31 noSuchReferenceObject A.11. ROER-processingFailure m m 32 A.11. ROER-setListError m m 33 A.11. RORJapdu m m 34 Table A.12 — Protocol data unit support for multiple object selection functional unit Sender Receiver Index Protocol data unit GenSt DepSt Spt GenSt DepSt Spt s s s s A.12. ROIV-m-LinkedReply- m m 1 Delete A.12. ROIV-m-LinkedReply-Get m m 2 A.12. ROIV-m-LinkedReply-Set m m 3 A.12. ROER-invalidScope m m 4 A.12. ROER-syncNotSupported m m 5 Table A.13 — Protocol data unit support for filter functional unit Sender Receiver Index Protocol data unit Sts Spt Sts Spt A.13. ROER-invalidFilter m m 1 Table A.14 — Protocol data unit support for multiple reply functional unit Sender Receiver Index Protocol data unit Sts Spt Sts Spt A.14. ROIV-m-LinkedReply- m m 1 Action Table A.15 — Protocol data unit support for cancel get functional unit Sender Receiver Index Protocol data unit Sts Spt Sts Spt A.15. ROIV-m-Cancel-Get m m 1 A.15. RORS-m-Cancel-Get m m 2 A.15. ROER-noSuchInvokeId m m 3 A.15. ROER-mistypedOperation m m 4 A.15. ROER-operationCancelled m m 5 A.5.5 PDU parameters The supplier of the implementation shall state whether or not each parameter for each of the protocol data units specified by CCITT Rec. X.711 | ISO/IEC 9596-1 are supported. The supplier shall indicate the type, value(s) and range(s) of each parameter. The supplier shall indicate the status of support for sending and receiving each parameter in each PDU. Table A.16 — ROIV-m-Action (sending) Index Parameter name Sts Syntax Value Spt TVR A.16.1 invokeID m INTEGER — A.16.2 linked-ID x INTEGER — A.16.3 operation-value m INTEGER 6 A.16.4 ActionArgument m SEQUENCE — — A.16.4.1 m CHOICE — — baseManagedObject Class A.16.4.1.1 c7 OBJECT — IDENTIFIER A.16.4.1.2 c7 INTEGER — A.16.4.2 m CHOICE — — baseManagedObject Instance A.16.4.2.1 c7 Distinguished — Name A.16.4.2.2 c7 OCTET STRING — A.16.4.2.3 c7 RDNSequence — A.16.4.3 accessControl o EXTERNAL — A.16.4.4 synchronization c2 ENUMERATED 0 to 1 A.16.4.5 scope c2 Scope — [see Table A.5] A.16.4.6 filter c3 CMISFilter — [see Table A.8] A.16.4.7 ActionInfo m SEQUENCE — — A.16.4.7.1 actionType m CHOICE — — A.16.4.7.1. c7 OBJECT — 1 IDENTIFIER A.16.4.7.1. c7 INTEGER — 2 A.16.4.7.2 actionInfoArg o ADB — actionType Table A.17 — ROIV-m-Action (receiving) Index Parameter name Sts Syntax Value Spt TVR A.17.1 invokeID m INTEGER — A.17.2 linked-ID x INTEGER — A.17.3 operation-value m INTEGER 6 A.17.4 ActionArgument m SEQUENCE — — A.17.4.1 m CHOICE — — baseManagedObject Class A.17.4.1.1 m OBJECT — IDENTIFIER A.17.4.1.2 m INTEGER — A.17.4.2 m CHOICE — — baseManagedObject Instance A.17.4.2.1 m Distinguished — Name A.17.4.2.2 m OCTET STRING — Table A.17 — ROIV-m-Action (receiving) (continued) Index Parameter name Sts Syntax Value Spt TVR A.17.4.2.3 m RDNSequence — A.17.4.3 accessControl m EXTERNAL — A.17.4.4 c2 ENUMERATED 0 to 1 synchronization A.17.4.5 scope c2 Scope — [see Table A.5] A.17.4.6 filter c3 CMISFilter — [see Table A.8] A.17.4.7 ActionInfo m SEQUENCE — — A.17.4.7.1 actionType m CHOICE — — A.17.4.7.1. m OBJECT — 1 IDENTIFIER A.17.4.7.1. m INTEGER — 2 A.17.4.7.2 m ADB — actionInfoArg actionType Table A.18 — ROIV-m-Action-Confirmed (sending) Index Parameter name Sts Syntax Value Spt TVR A.18.1 invokeID m INTEGER — A.18.2 linkedID x INTEGER — A.18.3 operation-value m INTEGER 7 A.18.4 ActionArgument m SEQUENCE — — A.18.4.1 m CHOICE — — baseManagedObject Class A.18.4.1.1 c7 OBJECT — IDENTIFIER A.18.4.1.2 c7 INTEGER — A.18.4.2 m CHOICE — — baseManagedObject Instance A.18.4.2.1 c7 Distinguished — Name A.18.4.2.2 c7 OCTET STRING — A.18.4.2.3 c7 RDNSequence — A.18.4.3 accessControl o EXTERNAL — A.18.4.4 synchronization c2 ENUMERATED 0 to 1 A.18.4.5 scope c2 Scope — [see Table A.5] A.18.4.6 filter c3 CMISFilter — [see Table A.8] A.18.4.7 ActionInfo m SEQUENCE — — A.18.4.7.1 actionType m CHOICE — — A.18.4.7.1. c7 OBJECT — 1 IDENTIFIER A.18.4.7.1. c7 INTEGER — 2 A.18.4.7.2 actionInfoArg o ADB — actionType Table A.19 — ROIV-m-Action-Confirmed (receiving) Index Parameter name Sts Syntax Value Spt TVR A.19.1 invokeID m INTEGER — A.19.2 linkedID x INTEGER — A.19.3 operation-value m INTEGER 7 A.19.4 ActionArgument m SEQUENCE — — A.19.4.1 m CHOICE — — baseManagedObject Class A.19.4.1.1 m OBJECT — IDENTIFIER A.19.4.1.2 m INTEGER — A.19.4.2 m CHOICE — — baseManagedObject Instance A.19.4.2.1 m Distinguished — Name A.19.4.2.2 m OCTET STRING — A.19.4.2.3 m RDNSequence — A.19.4.3 accessControl m EXTERNAL — A.19.4.4 synchronization c2 ENUMERATED 0 to 1 A.19.4.5 scope c2 Scope — [see Table A.5] A.19.4.6 filter c3 CMISFilter — [see Table A.8] A.19.4.7 ActionInfo m SEQUENCE — — A.19.4.7.1 actionType m CHOICE — — A.19.4.7.1. m OBJECT — 1 IDENTIFIER A.19.4.7.1. m INTEGER — 2 A.19.4.7.2 actionInfoArg m ADB — actionType Table A.20 — ROIV-m-Cancel-Get (sending) Index Parameter name Sts Syntax Value Spt TVR A.20.1 invokeID m INTEGER — A.20.2 linked-ID x INTEGER — A.20.3 operation-value m INTEGER 10 A.20.4 getInvokeId m INTEGER — Table A.21 — ROIV-m-Cancel-Get (receiving) Index Parameter name Sts Syntax Value Spt TVR A.21.1 invokeID m INTEGER — A.21.2 linked-ID x INTEGER — A.21.3 operation-value m INTEGER 10 A.21.4 getInvokeId m INTEGER — Table A.22 — ROIV-m-Create (sending) Index Parameter name Sts Syntax Value Spt TVR A.22.1 invokeID m INTEGER — A.22.2 linked-ID x INTEGER — A.22.3 operation-value m INTEGER 8 A.22.4 CreateArgument m SEQUENCE — — A.22.4.1 m CHOICE — — managedObjectCl ass A.22.4.1.1 c7 OBJECT — IDENTIFIER A.22.4.1.2 c7 INTEGER — A.22.4.2 o CHOICE — — A.22.4.2.1 m CHOICE — — managedObjectIn stance A.22.4.2.1. c7 Distinguished — 1 Name A.22.4.2.1. c7 OCTET STRING — 2 A.22.4.2.1. c7 RDNSequence — 3 A.22.4.2.2 m CHOICE — — superiorObjectI nstance A.22.4.2.2. c7 Distinguished — 1 Name A.22.4.2.2. c7 OCTET STRING — 2 A.22.4.2.2. c7 RDNSequence — 3 A.22.4.3 accessControl o EXTERNAL — A.22.4.4 o CHOICE — — referenceObject Instance A.22.4.4.1 c7 Distinguished — Name A.22.4.4.2 c7 OCTET STRING — A.22.4.4.3 c7 RDNSequence — A.22.4.5 attributeList o SET OF — — SEQUENCE A.22.4.5.1 attributeId m CHOICE — — A.22.4.5.1. c7 OBJECT — 1 IDENTIFIER A.22.4.5.1. c7 INTEGER — 2 A.22.4.5.2 m ADB — attributeValue attributeId Table A.23 — ROIV-m-Create (receiving) Index Parameter name Sts Syntax Value Spt TVR A.23.1 invokeID m INTEGER — A.23.2 linked-ID x INTEGER — A.23.3 operation-value m INTEGER 8 A.23.4 CreateArgument m SEQUENCE — — A.23.4.1 m CHOICE — — managedObjectCl ass A.23.4.1.1 m OBJECT — IDENTIFIER A.23.4.1.2 m INTEGER — Table A.23 — ROIV-m-Create (receiving) (continued) Index Parameter name Sts Syntax Value Spt TVR A.23.4.2 m CHOICE — — A.23.4.2.1 m CHOICE — — managedObjectInst ance A.23.4.2.1. m Distinguished — 1 Name A.23.4.2.1. m OCTET STRING — 2 A.23.4.2.1. m RDNSequence — 3 A.23.4.2.2 m CHOICE — — superiorObjectIns tance A.23.4.2.2. m Distinguished — 1 Name A.23.4.2.2. m OCTET STRING — 2 A.23.4.2.2. m RDNSequence — 3 A.23.4.3 accessControl m EXTERNAL — A.23.4.4 m CHOICE — — referenceObjectIn stance A.23.4.4.1 m Distinguished — Name A.23.4.4.2 m OCTET STRING — A.23.4.4.3 m RDNSequence — A.23.4.5 attributeList m SET OF — — SEQUENCE A.23.4.5.1 attributeId m CHOICE — — A.23.4.5.1. m OBJECT — 1 IDENTIFIER A.23.4.5.1. m INTEGER — 2 A.23.4.5.2 m ADB — attributeValue attributeId Table A.24 — ROIV-m-Delete (sending) Index Parameter name Sts Syntax Value Spt TVR A.24.1 invokeID m INTEGER — A.24.2 linked-ID x INTEGER — A.24.3 operation-value m INTEGER 9 A.24.4 DeleteArgument m SEQUENCE — — A.24.4.1 m CHOICE — — baseManagedObject Class A.24.4.1.1 c7 OBJECT — IDENTIFIER A.24.4.1.2 c7 INTEGER — A.24.4.2 m CHOICE — — baseManagedObject Instance A.24.4.2.1 c7 Distinguished — Name A.24.4.2.2 c7 OCTET STRING — A.24.4.2.3 c7 RDNSequence — A.24.4.3 accessControl o EXTERNAL — A.24.4.4 synchronization c2 ENUMERATED 0 to 1 A.24.4.5 scope c2 Scope — [see Table A.5] A.24.4.6 filter c3 CMISFilter — [see Table A.8] Table A.25 — ROIV-m-Delete (receiving) Index Parameter name Sts Syntax Value Spt TVR A.25.1 invokeID m INTEGER — A.25.2 linked-ID x INTEGER — A.25.3 operation-value m INTEGER 9 A.25.4 DeleteArgument m SEQUENCE — — A.25.4.1 m CHOICE — — baseManagedObject Class A.25.4.1.1 m OBJECT — IDENTIFIER A.25.4.1.2 m INTEGER — A.25.4.2 m CHOICE — — baseManagedObject Instance A.25.4.2.1 m Distinguished — Name A.25.4.2.2 m OCTET STRING — A.25.4.2.3 m RDNSequence — A.25.4.3 accessControl m EXTERNAL — A.25.4.4 synchronization c2 ENUMERATED 0 to 1 A.25.4.5 scope c2 Scope — [see Table A.5] A.25.4.6 filter c3 CMISFilter — [see Table A.8] Table A.26 — ROIV-m-EventReport (sending) Index Parameter name Sts Syntax Value Spt TVR A.26.1 invokeID m INTEGER — A.26.2 linked-ID x INTEGER — A.26.3 operation-value m INTEGER 0 A.26.4 EventReportArgu m SEQUENCE — — ment A.26.4.1 m CHOICE — — managedObjectCl ass A.26.4.1.1 c7 OBJECT — IDENTIFIER A.26.4.1.2 c7 INTEGER — A.26.4.2 m CHOICE — — managedObjectIn stance A.26.4.2.1 c7 Distinguished — Name A.26.4.2.2 c7 OCTET STRING — A.26.4.2.3 c7 RDNSequence — A.26.4.3 eventTime o GeneralizedTi — me A.26.4.4 eventType m CHOICE — — A.26.4.4.1 c7 OBJECT — IDENTIFIER A.26.4.4.2 c7 INTEGER — A.26.4.5 eventInfo o ADB eventType — Table A.27 — ROIV-m-EventReport (receiving) Index Parameter name Sts Syntax Value Spt TVR A.27.1 invokeID m INTEGER — A.27.2 linked-ID x INTEGER — A.27.3 operation-value m INTEGER 0 A.27.4 EventReportArgu m SEQUENCE — — ment A.27.4.1 m CHOICE — — managedObjectCl ass A.27.4.1.1 m OBJECT — IDENTIFIER A.27.4.1.2 m INTEGER — A.27.4.2 m CHOICE — — managedObjectIn stance A.27.4.2.1 m Distinguished — Name A.27.4.2.2 m OCTET STRING — A.27.4.2.3 m RDNSequence — A.27.4.4 eventType m CHOICE — — A.27.4.4.1 m OBJECT — IDENTIFIER A.27.4.4.2 m INTEGER — A.27.4.5 eventInfo m ADB eventType — Table A.28 — ROIV-m-EventReport-Confirmed (sending) Index Parameter name Sts Syntax Value Spt TVR A.28.1 invokeID m INTEGER — A.28.2 linked-ID x INTEGER — A.28.3 operation-value m INTEGER 1 A.28.4 EventReportArgu m SEQUENCE — — ment A.28.4.1 m CHOICE — — managedObjectCl ass A.28.4.1.1 c7 OBJECT — IDENTIFIER A.28.4.1.2 c7 INTEGER — A.28.4.2 m CHOICE — — managedObjectIn stance A.28.4.2.1 c7 Distinguished — Name A.28.4.2.2 c7 OCTET STRING — A.28.4.2.3 c7 RDNSequence — A.28.4.3 eventTime o GeneralizedTi — me A.28.4.4 eventType m CHOICE — — A.28.4.4.1 c7 OBJECT — IDENTIFIER A.28.4.4.2 c7 INTEGER — A.28.4.5 eventInfo o ADB eventType — Table A.29 — ROIV-m-EventReport-Confirmed (receiving) Index Parameter name Sts Syntax Value Spt TVR A.29.1 invokeID m INTEGER — A.29.2 linked-ID x INTEGER — A.29.3 operation-value m INTEGER 1 A.29.4 EventReportArgu m SEQUENCE — — ment A.29.4.1 m CHOICE — — managedObjectCl ass A.29.4.1.1 m OBJECT — IDENTIFIER A.29.4.1.2 m INTEGER — A.29.4.2 m CHOICE — — managedObjectIn stance A.29.4.2.1 m Distinguished — Name A.29.4.2.2 m OCTET STRING — A.29.4.2.3 m RDNSequence — A.29.4.3 eventTime m GeneralizedTi — me A.29.4.4 eventType m CHOICE — — A.29.4.4.1 m OBJECT — IDENTIFIER A.29.4.4.2 m INTEGER — A.29.4.5 eventInfo m ADB eventType — Table A.30 — ROIV-m-Get (sending) Index Parameter name Sts Syntax Value Spt TVR A.30.1 invokeID m INTEGER — A.30.2 linked-ID x INTEGER — A.30.3 operation-value m INTEGER 3 A.30.4 GetArgument m SEQUENCE — — A.30.4.1 m CHOICE — — baseManagedObject Class A.30.4.1.1 c7 OBJECT — IDENTIFIER A.30.4.1.2 c7 INTEGER — A.30.4.2 baseManagedObject m CHOICE — — Instance A.30.4.2.1 c7 Distinguished — Name A.30.4.2.2 c7 OCTET STRING — Table A.30 — ROIV-m-Get (sending) (continued) Index Parameter name Sts Syntax Value Spt TVR A.30.4.2.3 c7 RDNSequence — A.30.4.3 accessControl o EXTERNAL — A.30.4.4 c2 ENUMERATED 0 to 1 synchronization A.30.4.5 scope c2 Scope — [see Table A.5] A.30.4.6 filter c3 CMISFilter — [see Table A.8] A.30.4.7 o SET OF — — AttributeIdList SEQUENCE A.30.4.7.1 attributeId m CHOICE — — A.30.4.7.1. c7 OBJECT — 1 IDENTIFIER A.30.4.7.1. c7 INTEGER — 2 Table A.31 — ROIV-m-Get (receiving) Index Parameter name Sts Syntax Value Spt TVR A.31.1 invokeID m INTEGER — A.31.2 linked-ID x INTEGER — A.31.3 operation-value m INTEGER 3 A.31.4 GetArgument m SEQUENCE — — A.31.4.1 m CHOICE — — baseManagedObject Class A.31.4.1.1 m OBJECT — IDENTIFIER A.31.4.1.2 m INTEGER — A.31.4.2 m CHOICE — — baseManagedObject Instance A.31.4.2.1 m Distinguished — Name A.31.4.2.2 m OCTET STRING — A.31.4.2.3 m RDNSequence — A.31.4.3 accessControl m EXTERNAL — A.31.4.4 synchronization c2 ENUMERATED 0 to 1 A.31.4.5 scope c2 Scope — [see Table A.5] A.31.4.6 filter c3 CMISFilter — [see Table A.8] A.31.4.7 AttributeIdList m SET OF — — SEQUENCE A.31.4.7.1 attributeId m CHOICE — — A.31.4.7.1. m OBJECT — 1 IDENTIFIER A.31.4.7.1. m INTEGER — 2 Table A.32 — ROIV-m-LinkedReply-Action (sending) Index Parameter name Sts Syntax Value Spt TVR A.32.1 invokeID m INTEGER — A.32.2 linked-ID m INTEGER — A.32.3 operation-value m INTEGER 2 A.32.4 LinkedReplyArgu m CHOICE — — ment A.32.4.1 ActionResult m SEQUENCE — — A.32.4.1.1 m CHOICE — — managedObjectCl ass A.32.4.1.1. c7 OBJECT — 1 IDENTIFIER A.32.4.1.1. c7 INTEGER — 2 A.32.4.1.2 m CHOICE — — managedObjectIn stance A.32.4.1.2. c7 Distinguished — 1 Name A.32.4.1.2. c7 OCTET STRING — 2 A.32.4.1.2. c7 RDNSequence — 3 A.32.4.1.3 currentTime o GeneralizedTi — me A.32.4.1.4 ActionReply o SEQUENCE — — A.32.4.1.4. m CHOICE — — 1 actionType A.32.4.1.4. c7 OBJECT — 1.1 IDENTIFIER A.32.4.1.4. c7 INTEGER — 1.2 A.32.4.1.4. m ADB — 2 actionReplyInfo actionType A.32.4.2 m SEQUENCE — — ProcessingFailu re A.32.4.2.1 m CHOICE — — managedObjectCl ass A.32.4.2.1. c7 OBJECT — 1 IDENTIFIER A.32.4.2.1. c7 INTEGER — 2 A.32.4.2.2 m CHOICE — — managedObjectIn stance A.32.4.2.2. c7 Distinguished — 1 Name A.32.4.2.2. c7 OCTET STRING — 2 A.32.4.2.2. c7 RDNSequence — 3 A.32.4.2.3 m SEQUENCE — — SpecificErrorIn fo A.32.4.2.3. errorId m OBJECT — 1 IDENTIFIER A.32.4.2.3. errorInfo m ADB errorId — 2 Table A.32 — ROIV-m-LinkedReply-Action (sending) (continued) Index Parameter name Sts Syntax Value Spt TVR A.32.4.3 ActionError m SEQUENCE — — A.32.4.3.1 m CHOICE — — managedObjectCl ass A.32.4.3.1. c7 OBJECT — 1 IDENTIFIER A.32.4.3.1. c7 INTEGER — 2 A.32.4.3.2 m CHOICE — — managedObjectIn stance A.32.4.3.2. c7 Distinguished — 1 Name A.32.4.3.2. c7 OCTET STRING — 2 A.32.4.3.2. c7 RDNSequence — 3 A.32.4.3.3 currentTime o GeneralizedTi — me A.32.4.3.4 m SEQUENCE — — actionErrorInfo A.32.4.3.4. m ENUMERATED 2,9,14, 1 errorStatus 15 A.32.4.3.4. errorInfo m CHOICE — — 2 A.32.4.3.4. m CHOICE — — 2.1 actionType A.32.4.3.4. c7 OBJECT — 2.1.1 IDENTIFIER A.32.4.3.4. c7 INTEGER — 2.1.2 A.32.4.3.4. m SEQUENCE — — 2.2 actionArgument A.32.4.3.4. m CHOICE — — 2.2.1 managedObjectCl ass A.32.4.3.4. c7 OBJECT — 2.2.1.1 IDENTIFIER A.32.4.3.4. c7 INTEGER — 2.2.1.2 A.32.4.3.4. m CHOICE — — 2.2.2 actionType A.32.4.3.4. c7 OBJECT — 2.2.2.1 IDENTIFIER A.32.4.3.4. c7 INTEGER — 2.2.2.2 A.32.4.3.4. m CHOICE — — 2.3.1 actionType A.32.4.3.4. c7 OBJECT — 2.3.1.1 IDENTIFIER A.32.4.3.4. c7 INTEGER — 2.3.1.1 A.32.4.3.4. o ADB — 2.3.2 actionInfoArg actionType Table A.33 — ROIV-m-LinkedReply-Action (receiving) Index Parameter name Sts Syntax Value Spt TVR A.33.1 invokeID m INTEGER — A.33.2 linked-ID m INTEGER — A.33.3 operation-value m INTEGER 2 A.33.4 LinkedReplyArgu m CHOICE — — ment A.33.4.1 ActionResult m SEQUENCE — — A.33.4.1.1 m CHOICE — — managedObjectCl ass A.33.4.1.1. m OBJECT — 1 IDENTIFIER A.33.4.1.1. m INTEGER — 2 A.33.4.1.2 m CHOICE — — managedObjectIn stance A.33.4.1.2. m Distinguished — 1 Name A.33.4.1.2. m OCTET STRING — 2 A.33.4.1.2. m RDNSequence — 3 A.33.4.1.3 currentTime m GeneralizedTi — me A.33.4.1.4 ActionReply m SEQUENCE — — A.33.4.1.4. m CHOICE — — 1 actionType A.33.4.1.4. m OBJECT — 1.1 IDENTIFIER A.33.4.1.4. m INTEGER — 1.2 A.33.4.1.4. m ADB — 2 actionReplyInfo actionType A.33.4.2 m SEQUENCE — — ProcessingFailu re A.33.4.2.1 m CHOICE — — managedObjectCl ass A.33.4.2.1. m OBJECT — 1 IDENTIFIER A.33.4.2.1. m INTEGER — 2 A.33.4.2.2 m CHOICE — — managedObjectIn stance A.33.4.2.2. m Distinguished — 1 Name A.33.4.2.2. m OCTET STRING — 2 A.33.4.2.2. m RDNSequence — 3 A.33.4.2.3 m SEQUENCE — — SpecificErrorIn fo A.33.4.2.3. errorId m OBJECT — 1 IDENTIFIER A.33.4.2.3. errorInfo m ADB errorId — 2 A.33.4.3 ActionError m SEQUENCE — — A.33.4.3.1 m CHOICE — — managedObjectCl ass A.33.4.3.1. m OBJECT — 1 IDENTIFIER A.33.4.3.1. m INTEGER — 2 A.33.4.3.2 m CHOICE — — managedObjectIn stance Table A.33 — ROIV-m-LinkedReply-Action (receiving) (continued) Index Parameter name Sts Syntax Value Spt TVR A.33.4.3.2. m Distinguished — 1 Name A.33.4.3.2. m OCTET STRING — 2 A.33.4.3.2. m RDNSequence — 3 A.33.4.3.3 currentTime m GeneralizedTi — me A.33.4.3.4 m SEQUENCE — — actionErrorInfo A.33.4.3.4. m ENUMERATED 2,9,14, 1 errorStatus 15 A.33.4.3.4. errorInfo m CHOICE — — 2 A.33.4.3.4. m CHOICE — — 2.1 actionType A.33.4.3.4. m OBJECT — 2.1.1 IDENTIFIER A.33.4.3.4. m INTEGER — 2.1.2 A.33.4.3.4. m CHOICE — — 2.2.1 managedObjectCl ass A.33.4.3.4. m OBJECT — 2.2.1.1 IDENTIFIER A.33.4.3.4. m INTEGER — 2.2.1.2 A.33.4.3.4. m CHOICE — — 2.2.2 actionType A.33.4.3.4. m OBJECT — 2.2.2.1 IDENTIFIER A.33.4.3.4. m INTEGER — 2.2.2.2 A.33.4.3.4. m SEQUENCE — — 2.3 argumentValue A.33.4.3.4. m CHOICE — — 2.3.1 actionType A.33.4.3.4. m OBJECT — 2.3.1.1 IDENTIFIER A.33.4.3.4. m INTEGER — 2.3.1.1 A.33.4.3.4. m ADB — 2.3.2 actionInfoArg actionType Table A.34 — ROIV-m-LinkedReply-Delete (sending) Index Parameter name Sts Syntax Value Spt TVR A.34.1 invokeID m INTEGER — A.34.2 linked-ID m INTEGER — A.34.3 operation-value m INTEGER 2 A.34.4 LinkedReplyArgu m CHOICE — — ment A.34.4.1 m SEQUENCE — — ProcessingFailu re A.34.4.1.1 m CHOICE — — managedObjectCl ass A.34.4.1.1. c7 OBJECT — 1 IDENTIFIER A.34.4.1.1. c7 INTEGER — 2 A.34.4.1.2 m CHOICE — — managedObjectIn stance A.34.4.1.2. c7 Distinguished — 1 Name A.34.4.1.2. c7 OCTET STRING — 2 A.34.4.1.2. c7 RDNSequence — 3 Table A.34 — ROIV-m-LinkedReply-Delete (sending) (continued) Index Parameter name Sts Syntax Value Spt TVR A.34.4.1.3 m SEQUENCE — SpecificErrorIn fo A.34.4.1.3. errorId m OBJECT — 1 IDENTIFIER A.34.4.1.3. errorInfo m ADB errorId — 2 A.34.4.2 DeleteResult m SEQUENCE — — A.34.4.2.1 m CHOICE — — managedObjectCl ass A.34.4.2.1. c7 OBJECT — 1 IDENTIFIER A.34.4.2.1. c7 INTEGER — 2 A.34.4.2.2 m CHOICE — — managedObjectIn stance A.34.4.2.2. c7 Distinguished — 1 Name A.34.4.2.2. c7 OCTET STRING — 2 A.34.4.2.2. c7 RDNSequence — 3 A.34.4.2.3 currentTime o GeneralizedTi — — me A.34.4.3 DeleteError m SEQUENCE — — A.34.4.3.1 m CHOICE — — managedObjectCl ass A.34.4.3.1. c7 OBJECT — 1 IDENTIFIER A.34.4.3.1. c7 INTEGER — 2 A.34.4.3.2 m CHOICE — — managedObjectIn stance A.34.4.3.2. c7 Distinguished — 1 Name A.34.4.3.2. c7 OCTET STRING — 2 A.34.4.3.2. c7 RDNSequence — 3 A.34.4.3.3 currentTime o GeneralizedTi — me A.34.4.3.4 m ENUMERATED 2 — deleteErrorInfo Table A.35 — ROIV-m-LinkedReply-Delete (receiving) Index Parameter name Sts Syntax Value Spt TVR A.35.1 invokeID m INTEGER — A.35.2 linked-ID m INTEGER — A.35.3 operation-value m INTEGER 2 A.35.4 LinkedReplyArgu m CHOICE — — ment A.35.4.1 m SEQUENCE — — ProcessingFailu re A.35.4.1.1 m CHOICE — — managedObjectCl ass A.35.4.1.1. m OBJECT — 1 IDENTIFIER A.35.4.1.1. m INTEGER — 2 A.35.4.1.2 m CHOICE — — managedObjectIn stance A.35.4.1.2. m Distinguished — 1 Name A.35.4.1.2. m OCTET STRING — 2 A.35.4.1.2. m RDNSequence — 3 A.35.4.1.3 m SEQUENCE — SpecificErrorIn fo A.35.4.1.3. errorId m OBJECT — 1 IDENTIFIER A.35.4.1.3. errorInfo m ADB errorId — 2 A.35.4.2 DeleteResult m SEQUENCE — — A.35.4.2.1 m CHOICE — — managedObjectCl ass A.35.4.2.1. m OBJECT — 1 IDENTIFIER A.35.4.2.1. m INTEGER — 2 A.35.4.2.2 m CHOICE — — managedObjectIn stance A.35.4.2.2. m Distinguished — 1 Name A.35.4.2.2. m OCTET STRING — 2 A.35.4.2.2. m RDNSequence — 3 A.35.4.2.3 currentTime m GeneralizedTi — — me A.35.4.3 DeleteError m SEQUENCE — — A.35.4.3.1 m CHOICE — — managedObjectCl ass A.35.4.3.1. m OBJECT — 1 IDENTIFIER A.35.4.3.1. m INTEGER — 2 A.35.4.3.2 m CHOICE — — managedObjectIn stance A.35.4.3.2. m Distinguished — 1 Name A.35.4.3.2. m OCTET STRING — 2 A.35.4.3.2. m RDNSequence — 3 A.35.4.3.3 currentTime m GeneralizedTi — me A.35.4.3.4 m ENUMERATED 2 — deleteErrorInfo Table A.36 — ROIV-m-LinkedReply-Get (sending) Index Parameter name Sts Syntax Value Spt TVR A.36.1 invokeID m INTEGER — A.36.2 linked-ID m INTEGER — A.36.3 operation-value m INTEGER 2 A.36.4 LinkedReplyArgu m CHOICE — — ment A.36.4.1 GetResult m SEQUENCE — — A.36.4.1.1 m CHOICE — — managedObjectCl ass A.36.4.1.1. c7 OBJECT — 1 IDENTIFIER A.36.4.1.1. c7 INTEGER — 2 A.36.4.1.2 m CHOICE — — managedObjectIn stance A.36.4.1.2. c7 Distinguished — 1 Name A.36.4.1.2. c7 OCTET STRING — 2 A.36.4.1.2. c7 RDNSequence — 3 A.36.4.1.3 currentTime o GeneralizedTi — me A.36.4.1.4 m SET OF — — attributeList SEQUENCE A.36.4.1.4. m CHOICE — — 1 attributeId A.36.4.1.4. c7 OBJECT — 1.1 IDENTIFIER A.36.4.1.4. c7 INTEGER — 1.2 A.36.4.1.4. m ADB — 2 attributeValue attributeId A.36.4.2 GetListError m SEQUENCE — — A.36.4.2.1 m CHOICE — — managedObjectCl ass A.36.4.2.1. c7 OBJECT — 1 IDENTIFIER A.36.4.2.1. c7 INTEGER — 2 A.36.4.2.2 m CHOICE — — managedObjectIn stance A.36.4.2.2. c7 Distinguished — 1 Name A.36.4.2.2. c7 OCTET STRING — 2 A.36.4.2.2. c7 RDNSequence — 3 A.36.4.2.3 currentTime o GeneralizedTi — me A.36.4.2.4 getInfoList m SET OF CHOICE — — A.36.4.2.4. m SEQUENCE — — 1 AttributeIdErro r A.36.4.2.4. m ENUMERATED 2,5 1.1 errorStatus A.36.4.2.4. m CHOICE — — 1.2 attributeId A.36.4.2.4. c7 OBJECT — 1.2.1 IDENTIFIER A.36.4.2.4. c7 INTEGER — 1.2.2 A.36.4.2.4. Attribute m SEQUENCE — — 2 A.36.4.2.4. m CHOICE — — 2.1 attributeId A.36.4.2.4. c7 OBJECT — 2.1.1 IDENTIFIER Table A.36 — ROIV-m-LinkedReply-Get (sending) (continued) Index Parameter name Sts Syntax Value Spt TVR A.36.4.2.4. c7 INTEGER — 2.1.2 A.36.4.2.4. m ADB — — 2.2 attributeValue attributeId A.36.4.3 m SEQUENCE — — ProcessingFailu re A.36.4.3.1 m CHOICE — — managedObjectCl ass A.36.4.3.1. c7 OBJECT — 1 IDENTIFIER A.36.4.3.1. c7 INTEGER — 2 A.36.4.3.2 m CHOICE — — managedObjectIn stance A.36.4.3.2. c7 Distinguished — 1 Name A.36.4.3.2. c7 OCTET STRING — 2 A.36.4.3.2. c7 RDNSequence — 3 A.36.4.3.3 m SEQUENCE — — SpecificErrorIn fo A.36.4.3.3. errorId m OBJECT — 1 IDENTIFIER A.36.4.3.3. errorInfo m ADB errorId — 2 Table A.37 — ROIV-m-LinkedReply-Get (receiving) Index Parameter name Sts Syntax Value Spt TVR A.37.1 invokeID m INTEGER — A.37.2 linked-ID m INTEGER — A.37.3 operation-value m INTEGER 2 A.37.4 LinkedReplyArgu m CHOICE — — ment A.37.4.1 GetResult m SEQUENCE — — A.37.4.1.1 m CHOICE — — managedObjectCl ass A.37.4.1.1. m OBJECT — 1 IDENTIFIER A.37.4.1.1. m INTEGER — 2 A.37.4.1.2 m CHOICE — — managedObjectIn stance A.37.4.1.2. m Distinguished — 1 Name A.37.4.1.2. m OCTET STRING — 2 A.37.4.1.2. m RDNSequence — 3 A.37.4.1.3 currentTime m GeneralizedTi — me A.37.4.1.4 m SET OF — — attributeList SEQUENCE A.37.4.1.4. m CHOICE — — 1 attributeId A.37.4.1.4. m OBJECT — 1.1 IDENTIFIER Table A.37 — ROIV-m-LinkedReply-Get (receiving) (continued) Index Parameter name Sts Syntax Value Spt TVR A.37.4.1.4. m INTEGER — 1.2 A.37.4.1.4. m ADB — 2 attributeValue attributeId A.37.4.2 GetListError m SEQUENCE — — A.37.4.2.1 m CHOICE — — managedObjectCl ass A.37.4.2.1. m OBJECT — 1 IDENTIFIER A.37.4.2.1. m INTEGER — 2 A.37.4.2.2 m CHOICE — — managedObjectIn stance A.37.4.2.2. m Distinguished — 1 Name A.37.4.2.2. m OCTET STRING — 2 A.37.4.2.2. m RDNSequence — 3 A.37.4.2.3 currentTime m GeneralizedTi — me A.37.4.2.4 getInfoList m SET OF CHOICE — — A.37.4.2.4. m SEQUENCE — — 1 AttributeIdErro r A.37.4.2.4. m ENUMERATED 2,5 1.1 errorStatus A.37.4.2.4. m CHOICE — — 1.2 attributeId A.37.4.2.4. m OBJECT — 1.2.1 IDENTIFIER A.37.4.2.4. m INTEGER — 1.2.2 A.37.4.2.4. Attribute m SEQUENCE — — 2 A.37.4.2.4. m CHOICE — — 2.1 attributeId A.37.4.2.4. m OBJECT — 2.1.1 IDENTIFIER A.37.4.2.4. m INTEGER — 2.1.2 A.37.4.2.4. m ADB — — 2.2 attributeValue attributeId A.37.4.3 m SEQUENCE — — ProcessingFailu re A.37.4.3.1 m CHOICE — — managedObjectCl ass A.37.4.3.1. m OBJECT — 1 IDENTIFIER A.37.4.3.1. m INTEGER — 2 A.37.4.3.2 m CHOICE — — managedObjectIn stance A.37.4.3.2. m Distinguished — 1 Name A.37.4.3.2. m OCTET STRING — 2 A.37.4.3.2. m RDNSequence — 3 A.37.4.3.3 m SEQUENCE — — SpecificErrorIn fo A.37.4.3.3. errorId m OBJECT — 1 IDENTIFIER A.37.4.3.3. errorInfo m ADB errorId — 2 _______________________________ 1) Users of this Recommendation | International Standard may freely reproduce the PICS proforma in this Annex so that it can be used for its intended purpose, and may further publish the completed PICS.